Metal Buildings · Peyton, CO
Metal Building Contractors in Peyton, CO
Metal Buildings for Peyton and El Paso County. Call or fill out the form for a free quote.
Peyton, El Paso County and every town within 100 miles of Parker, CO
Swipe for more reviews →
Get a Free Metal Building Quote in Peyton
Free quotes. Fill out the form or call, and we'll get right back to you.
- Free quotes
- Licensed & insured
- One builder, start to finish
- 100-mile service area
Fill out the form below to get your free quote 👇
Metal Buildings · Peyton
Metal Buildings in Peyton, built by one builder
If you're looking for metal building contractors in Peyton, Colorado Barn Builders builds steel buildings sold and installed, engineered for local snow and wind all over El Paso County.
Around the edge of the metro it's acreage, horse property and big lots: pole barns for equipment and toys, heated shops, RV garages, horse barns and barndominiums on land people bought to get some room. Covenants in acreage subdivisions often set colors, height and setbacks, so we check them first.
The quote is free: tell us the size, what the building is for and where the property is.
What's included
Metal Buildings we do in Peyton
- 01
Red iron and light-gauge steel
Pre-engineered red-iron buildings for wide clear spans and tall doors, and light-gauge steel frames for garages and smaller shops.
- 02
Metal barns, garages and shops
Steel barns, RV garages, workshops and equipment buildings, with the trim colors, wainscot and lean-tos you choose.
- 03
Company shops and multi-bay buildings
Steel buildings for businesses, with several bays, roll-up doors and room for trucks and work.
- 04
Engineered for your site
Every building is engineered for the snow and wind loads at its address, with the anchoring and door framing that wind on the plains calls for.
- 05
Slab poured to the anchor plan
A notched-edge slab with a raised perimeter, footings for frost, a vapor barrier and mesh or rebar, with radiant tubing laid first if you want in-floor heat.
- 06
Insulation and interior finish
Insulation and vapor control in the roof and walls to control condensation, plus liner panels, framed rooms or living space inside.
El Paso County, Colorado
Metal Buildings around Peyton
We build all over Peyton and the rest of El Paso County, including nearby Calhan, Black Forest and Elbert.
Peyton is a rural El Paso County community east of Colorado Springs, out on the open prairie. Peyton is about 35 miles southeast of our base in Parker, CO, well inside our 100-mile service area.
Colorado is hard on buildings: snow loads that change with elevation and county, wind that hammers open ground on the plains and the Palmer Divide, hail, and clay soils that swell and shrink under a slab. So every building is engineered for the snow and wind where it sits, the slab goes on a prepared, compacted base with footings below the frost line, and insulation and vapor control keep condensation off the steel.
Real work · not stock photos
Our metal building work
Photos from our own jobs.
Our crew's work
More photos from our metal building jobs
Smaller photos from the job site, shown at their actual size.
How it works
How your Peyton metal building job works
- 1
Free quote and site visit
Tell us what the building is for and where it goes. We visit the site, check access, soil and drainage, and give you a free quote.
- 2
Design and engineering
We set the size, eave height, doors, colors and options with you, and engineer the building for your site's snow and wind.
- 3
Permit, site and slab
We handle the permit with the county or city, prepare the ground and pour the slab to the building's anchor plan.
- 4
Erection and finish
We stand the steel frame, sheet the roof and walls, install the doors and insulation and finish the inside, with an update every week.
Customer reviews
What our customers say
“Great communication! Fair Price and took care of everything as it came up.”
Travis S.
Garage building · HomeAdvisor review
“Mike is a true professional in every way. Versatile, reliable, well skilled, and extremely knowledgeable. Easy to work with and a hard worker. His pricing is reasonable and his estimates for his work were spot on. I trusted him completely, as I am an absentee owner and could not be on site to oversee progress. He gave me updates and photos. A great find. Would recommend without any reservation. Hire him if u want it done right and on time.”
Jim S.
Work for an absentee owner · HomeAdvisor review
“Mike and crew was simply amazing. He always made sure I was satisfied, had good communication, and did a great job. Good prices and services, I can’t recommend home enough. This was a big job and he came through, Thank you!”
Chad T.
A big job · HomeAdvisor review
“Mike was great at communicating with me and was incredibly competitive in his pricing. The work was done quickly and was high quality. I would absolutely recommend his company to anyone needing work done on their houses.”
Lora T.
Home project · HomeAdvisor review
“I am so appreciative of the quality, responsiveness, and value that Mike Fowler and his crew performed on completely remodeling and expanding our kitchen including moving walls. He did it in a timely manner, provided progress updates often and finished the job in record time. We get compliments all the time on the quality of the work and how our kitchen has been completely transformed. He coordinated or did himself all the carpentry, electrical, appliance installation, cabinets, and countertop installation after we approved the plan he drew out for us. I also used him to add a shower to my laundry room, cut down a huge tree in my yard, and put a new face around my fireplace. I would highly recommend Mike for ANY remodeling work you are considering for your house. His prices are competitive too”
Rich R.
Kitchen remodel and expansion · HomeAdvisor review
“Mike has done my entire unfinished basement and his work ethics and willingness to work with changing design needs is exceptional. Mike's patience and quality of work is exceptional. His only goal is to ensure that customer is happy and he doesn't hesitate to redo things if customer wanted differently. I was very happy with his work and did recommend to a friend who is doing his complete basement. he is very affordable versus some of the crazy quotes we got.”
Damodara M.
Basement finish · HomeAdvisor review
Questions
Metal Buildings in Peyton: FAQs
Do you build metal buildings in Peyton, CO?
Yes. Peyton is about 35 miles southeast of our base in Parker, CO, well inside our 100-mile service area. We build steel buildings sold and installed, engineered for local snow and wind there, and the quote is free.
Do I need a permit for a metal building in Peyton?
Usually. When one is needed, we get it from El Paso County, since Peyton is unincorporated and build to whatever the permit and inspections require.
How are your metal buildings built for Colorado snow and wind?
Each one is engineered for the ground snow load and wind exposure at its address. Snow loads are set by the county and rise fast with elevation, so a building in Bailey or Woodland Park needs far more roof than one in Brighton. On the plains and the Palmer Divide, anchoring and door bracing matter as much as the frame. We also build the slab for expansive soils and slope the grade so water runs away.
Do I need a permit for a metal building?
In most cases, yes. The county issues it on unincorporated land and the city inside town limits, and they will want engineered drawings for your site and a foundation plan. HOA and covenant rules in acreage subdivisions can limit steel siding, colors and height. We check your parcel, work with the building department and handle the permit for you.
What is the difference between red iron and light-gauge steel?
Red iron is a pre-engineered metal building with heavy structural steel columns and rafters, the usual choice for wide clear spans, tall doors and commercial use. Light-gauge steel uses lighter cold-formed members, which suits garages, carports and smaller shops. Both can be engineered for Colorado loads, and we recommend the frame that fits your size, use and site.
Do you only sell the building, or install it too?
We sell and install. One builder handles the building, engineering, permit, site prep, slab, erection, doors, insulation and finish, so the slab matches the anchor plan and no part of the job waits on another contractor. You get one schedule, one point of contact and weekly progress updates.
Ready to start your Peyton metal building project?
Free quotes. Call or fill out the form.